Card Add in ZTE ZXA10 C220 OLT-ZTE Add in ZTE ZXA10 C220 OLT Add in ZTE ZXA10 C220 OLT

***Card Add in ZTE ZXA10 C220 OLT***

Please make sure that network device works normally.

Please make sure that the shelf is configured.

Please log in to the ZXA10 C220 through HyperTerminal or Telnet.


The ZXA10 C220 identifies control switching cards automatically. The other cards are installed in slots 1 – 6 and 9 –14.

Task-1: Enter the configure terminal command to enter global configuration mode.

Task-2: Enter the add-card command to configure card.

Task-3: Enter the show card command to query card configuration.



 ***Configuration Steps***

A GPON card (GPFA) to slot 3.

An uplink card (EIGM) to slot 11.

OLT-1#configure terminal

OLT-1(config)#add-card slotno 3 GPFA

 OLT-1(config)#add-card slotno 11 EIGM

OLT-1(config)#show card



Be the first to comment

Leave a Reply

Your email address will not be published.


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.