Card Reset and Swapping Main/Backup Card in ZTE OLT-ZTE

***Card Reset in ZTE OLT***

Please make sure that the network device works normally.

Please log in to the ZXA10 C220 through HyperTerminal or Telnet.

IMPORTANT:

**A card is reset in the following scenarios**

The card is faulty.

The card version is upgraded.

***** Enter the reset-card command to reset card****

OLT-1#reset-card slotno 3

Confirm to reset card? [yes/no]:y

Reset the card in slot 3

 

***Swapping Main/Backup Card***

Please make sure that the network device works normally.

Both main control switching card and backup control switching cards work normally.

Please log in to the ZXA10 C220 through HyperTerminal or Telnet.

 

IMPORTANT:

When there is a fault on the control switching card or version upgrading, swap the main and back control switching cards.

**** Enter the swap command to swap main/backup control switching cards****

OLT-1#swap

Confirm to master swap? [yes/no]:y

 Swap the main control switching card and the backup control switching card.

 

***END***

 

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.