Configuration Example of RIP-HUAWEI

*******RIP Configuration-GPON********

  • Configure OLT-1.
    1. Configure the RIP-supported L3 interface.
      OLT-1(config)#vlan 100 smart
      OLT-1(config)#port vlan 100 0/9 0
      OLT-1(config)#interface vlanif 100
      OLT-1(config-if-vlanif100)#ip address 192.13.24.5 22
      OLT-1(config-if-vlanif100)#quit
      OLT-1(config)#interface loopBack 0
      OLT-1(config-if-loopback0)#ip address 192.13.2.1 24
      OLT-1(config-if-loopback0)#quit
      
    2. Enable RIP.
      OLT-1(config)#rip 1
      OLT-1(config-rip-1)#network 192.13.24.0
      OLT-1(config-rip-1)#network 192.13.2.0
      OLT-1(config-rip-1)#version 2
      OLT-1(config-rip-1)#quit
      
    3. Configure the route filtering policy.
      OLT-1(config)#ip ip-prefix abc permit 192.13.2.1 32
      OLT-1(config)#ip ip-prefix abc permit 192.13.2.2 32
      OLT-1(config)#rip 1
      OLT-1(config-rip-1)#filter-policy ip-prefix abc export vlanif 100
      OLT-1(config-rip-1)#quit
    4. Configure the subtending port.
      OLT-1(config)#vlan 10 smart
      OLT-1(config)#port vlan 10 0/9 1
      OLT-1(config)#interface vlanif 10   
      OLT-1(config-if-vlanif10)#ip address 192.15.24.1 26
      OLT-1(config-if-vlanif10)#quit
      
    5. Enable RIP on the subtending port.
      OLT-1(config)#rip 1
      OLT-1(config-rip-1)#network 192.15.24.0
      OLT-1(config-rip-1)#quit
      
    6. Save the data.
      OLT-1(config)#save
      
  • Configure OLT-2.
    1. Configure the RIP-supported L3 interface.
      OLT-2(config)#vlan 10 smart
      OLT-2(config)#port vlan 10 0/19 0
      OLT-2(config)#interface vlanif 10
      OLT-2(config-if-vlanif10)#ip address 192.15.24.2 26
      OLT-2(config-if-vlanif10)#quit
      OLT-2(config)#interface loopBack 0
      OLT-2(config-if-loopback0)#ip address 192.13.2.2 24
      OLT-2(config-if-loopback0)#quit
      
    2. Enable RIP.
      OLT-2(config)#rip 1
      OLT-2(config-rip-1)#network 192.15.24.0
      OLT-2(config-rip-1)#network 192.13.2.0
      OLT-2(config-rip-1)#version 2
      OLT-2(config-rip-1)#quit
      
    3. Configure the route filtering policy.
      OLT-2(config)#ip ip-prefix abc permit 192.13.2.2 32
      OLT-2(config)#rip 1
      OLT-2(config-rip-1)#filter-policy ip-prefix abc export vlanif 10
      OLT-2(config-rip-1)#quit
      
    4. Save the data.
      OLT-2(config)#save

                                        ******END*******

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.