Configuration of the Static Route-HUAWEI

**********Static Route Configuration-GPON**********

  1. Configure the IP address of the L3 interface.The configurations for the three MA5600T devices are the same.
    OLT(config)#vlan 2 smart
    OLT(config)#port vlan 2 0/19 0
    OLT(config)#interface vlanif 2
    OLT(config-if-vlanif2)#ip address 1.1.1.2 24
    OLT(config-if-vlanif2)#ip address 1.1.2.1 24 sub
    OLT(config-if-vlanif2)#quit
  2. Configure static routes.
    1. Configure static route for OLT-1.
      OLT-1(config)#ip route-static 1.1.5.0 255.255.255.0 1.1.2.2
      OLT-1(config)#ip route-static 1.1.4.0 255.255.255.0 1.1.2.2
    2. Configure static route for OLT-2.
      OLT-2(config)#ip route-static 1.1.5.0 255.255.255.0 1.1.3.1
      OLT-2(config)#ip route-static 1.1.1.0 255.255.255.0 1.1.3.1
    3. Configure static routes for OLT-3.
      OLT-3(config)#ip route-static 1.1.1.0 255.255.255.0 1.1.2.1
      OLT-3(config)#ip route-static 1.1.4.0 255.255.255.0 1.1.3.2
  3. Configure the host gateways.
    1. Configure the default gateway of Host A to 1.1.1.2.
    2. Configure the default gateway of Host B to 1.1.4.2.
    3. Configure the default gateway of Host C to 1.1.5.2.
  4. Save the data.
    OLT#save

                                                                           ********END********

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.