Configuration File of ZTE ONU Register in ZXA10 C220 OLT-ZTE

***Configuration File of ZTE ONU Register in ZXA10 C220 OLT***

****Query unconfigured ONU on the GPON-OLT port****

OLT-1#show gpon onu uncfg gpon-olt_0/5/1

****Enter the GPON-OLT interface configuration mode****

OLT-1#configure terminal

OLT-1(config)#interface gpon-olt_0/5/1

OLT-1(config-if)#

****Register ONU****

OLT-1(config-if)#register 1 type ZTE-F621 ZTE_06120664 state ready

****Query ONU state****

OLT-1(config-if)#show gpon onu state gpon-olt_0/5/1

OLT-1(config-if)#exit

OLT-1(config)#

****Enter the GPON configuration mode****

OLT-1(config)#gpon

OLT-1(config-gpon)#

****Configure bandwidth profile****

OLT-1(config-gpon)#bandwidth-profile T1-50M type 4 maximum 50000

OLT-1(config-gpon)#exit

OLT-1(config)#

****Enter the GPON-ONU interface configuration mode****

OLT-1(config)#interface gpon-onu_0/5/1:1

OLT-1(config-if)#

****Create T-CONT****

OLT-1(config-if)#tcont 1 name Tcont50M traffic T1-50M

****Create GEM port****

OLT-1(config-if)#gemport 1 name Gemport1 unicast tcont 1

OLT-1(config-if)#exit

OLT-1(config)#

****Enter the GPON-ONU interface configuration mode****

OLT-1(config)#interface gpon-onu_0/5/1:1

OLT-1(config-if)#

****Configure port mode to hybrid****

OLT-1(config-if)#switchport mode hybrid vport 1

IMPORTANT:

By default, one V-port corresponds to one GEM port.

****Add port to service VLAN in tag mode****

OLT-1(config-if)#switchport vlan 100 tag vport 1

OLT-1(config-if)#exit

OLT-1(config)#

IMPORTANT:

When a port is added to a VLAN, the VLAN is added automatically.

****Enter the OLT uplink port configuration mode****

OLT-1(config)#interface gei_0/14/1

****Configure uplink port mode to hybrid****

OLT-1(config-if)#switchport mode hybrid

****Add uplink port to service VLAN in tag mode****

OLT-1(config-if)#switchport vlan 100 tag

OLT-1(config-if)#exit

OLT-1(config)#

****Enter the ONU remote management mode****

OLT-1(config)#pon-onu-mng gpon-onu_0/5/1:1

OLT-1(gpon-onu-mng)#

****Configure the map between GEM port and uplink interface****

OLT-1(gpon-onu-mng)#interwork gemport Gemport1 dot1p-bridge uplink_0/1/1 prio-list 1

****Bind the UNI to bridge interface****

OLT-1(gpon-onu-mng)#bridge-port uni-bind eth_0/1 bridge_0/1

****Configure UNI VLAN and priority****

OLT-1(gpon-onu-mng)#vlan-tag uni eth_0/1 up-mode overwrite upprio 1 up-vid 100 down-mode untag

****Configure VLAN filter mode on UNI****

OLT-1(gpon-onu-mng)#vlan-filter-mode uni eth_0/1 tag-filter vid-filter untag-filter transparent

****Configure VLAN filter entry on UNI****

OLT-1(gpon-onu-mng)#vlan-filter uni eth_0/1 priority 1 vid 100

****Configure VLAN filter mode on uplink interface****

OLT-1(gpon-onu-mng)#vlan-filter-mode uplink uplink_0/1/1 tagfilter vid-filter untag-filter discard

****Configure VLAN filter entry on uplink interface****

OLT-1(gpon-onu-mng)#vlan-filter uplink uplink_0/1/1 priority 1 vid 100

****Save configuration data****

OLT-1#write

Configuration Procedure>>

***END***

2 Comments

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.