Configuration of a GPON ONT-HUAWEI

********Configuration of a GPON ONT********

To add an ONT that is managed by the OLT through the OMCI protocol, confirm this ONT according to the SN 3230313185885B41 automatically reported by the system, and bind the ONT with capability profile 3 that match the ONT, do as follows:

OLT(config)#interface gpon 0/18
OLT(config-if-gpon-0/18)#port 0 ont-auto-find enable 
OLT(config-if-gpon-0/18)#ont confirm 0 sn-auth 3230313185885B41 profile-id 3 
manage-mode omci description HG850a

To add an ONU that is managed as an independent NE and whose SN is known as 3230313100885641, bind the ONU with capability profile 4 that matches the ONU, configure the NMS parameters for the ONU, and set the management VLAN to 100, do as follows:

OLT(config)#snmp-profile add profile-id 1 v2c public private 134.140.5.53 161 huawei
OLT(config)#interface gpon 0/18
OLT(config-if-gpon-0/18)#ont add 0 2 sn-auth 3230313100885641 profile-id 4 manage-mode snmp 
OLT(config-if-gpon-0/18)#ont ipconfig 0 2 static ip-address 133.7.22.220 mask
255.255.254.0 gateway 133.7.22.1 vlan 100  
OLT(config-if-gpon-0/18)#ont snmp-profile 0 2 profile-id 1 
OLT(config-if-gpon-0/18)#ont snmp-route 0 2 ip-address 133.7.22.190 mask 
255.255.254.0 next-hop 133.7.22.100

                                      *****END*****

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.