Configuration of the ARP Proxy-HUAWEI

**********ARP Proxy Configuration-GPON**********

  1. Create a super VLAN.
    OLT(config)#vlan 100 super
  2. Create sub VLANs, and add them to the super VLAN.
    OLT(config)#vlan 10 smart 
    OLT(config)#vlan 20 mux 
    OLT(config)#supervlan 100 subvlan 10
    OLT(config)#supervlan 100 subvlan 20
  3. Configure the service ports of the sub VLANs.
    OLT(config)#service-port vlan 10 gpon 0/2/0 gemport 128 multi-service user-vlan 15 rx-cttr 5 tx-cttr 5
    OLT(config)#service-port vlan 10 gpon 0/2/0 gemport 129 multi-service user-vlan 16 rx-cttr 5 tx-cttr 5
    OLT(config)#service-port vlan 20 gpon 0/2/0 gemport 130 multi-service user-vlan 17 rx-cttr 5 tx-cttr 5
  4. Configure the upstream port.
    OLT(config)#vlan 30 standard
    OLT(config)#port vlan 30 0/19 0
    OLT(config)#interface vlanif 30
    OLT(config-if-vlanif30)#ip address 10.0.1.254 24
  5. Configure an L3 Interface for the super VLAN
    OLT(config)#interface vlanif 100
    OLT(config-if-vlanif100)#ip address 10.0.0.254 24
    
  6. Enable ARP proxy.
    1. Enable the ARP proxy function globally.
      OLT(config)#arp proxy enable
    2. Enable the global ARP proxy on the VLAN interface.
      OLT(config-if-vlanif100)#arp proxy enable
    3. Enable ARP proxy on the sub VLAN interface.
      OLT(config-if-vlanif100)#arp proxy enable subvlan 10
      OLT(config-if-vlanif100)#quit
      
  7. Save the data.
    OLT(config)#save

                                                                                                                       *******END******

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.