Configuration of the ANCP-HUAWEI

********Configuration of the ANCP-GPON********

To configure the GSMP address for an ANCP session as 10.10.10.10, the interval for sending packets during the initial stage of an ANCP session to 2s, ANCP session capability set to topology-discovery, ANCP packet sending priority to 7, GSMP TCP communication port number on the NAS side in an ANCP session to 6000, and interval for sending packets during the ANCP session stage as 7s, and then enable the ANCP function, do as follows:

OLT(config)#ancp session 1
OLT(config-session-1)#ancp ip 10.10.10.10
OLT(config-session-1)#ancp capability topology-discovery
OLT(config-session-1)#ancp ancp-8021p 7
OLT(config-session-1)#ancp nas-tcp-port 6000
OLT(config-session-1)#ancp init-interval 20
OLT(config-session-1)#ancp keep-alive 70
OLT(config-session-1)#ancp enable
OLT(config-session-1)#quit
OLT(config)#display ancp session 1

                                     ******END******

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.