Configuration of the MSTP-HUAWEI

                       *******Configuration of the MSTP-GPON******

OLT(config)#stp enable
 Change global stp state may active region configuration,it may take several
minutes,are you sure to change global stp state? [Y/N][N]y
OLT(config)#stp port 0/7/0 enable
OLT(config)#stp mode mstp
OLT(config)#stp md5-key 11ed224466
OLT(config)#stp region-configuration
OLT(stp-region-configuration)#region-name huawei-mstp-bridge
OLT(stp-region-configuration)#instance 3 vlan 2 to 10 12 to 16
OLT(stp-region-configuration)#vlan-mapping module 16
OLT(stp-region-configuration)#revision-level 100
OLT(stp-region-configuration)#active region-configuration
OLT(stp-region-configuration)#quit
OLT(config)#stp instance 2 root primary
OLT(config)#stp instance 2 priority 4096
OLT(config)#stp max-hops 10
OLT(config)#stp bridge-diameter 6
OLT(config)#stp pathcost-standard dot1t
OLT(config)#stp timer forward-delay 2000
OLT(config)#stp timer hello 1000
OLT(config)#stp timer max-age 3000
OLT(config)#stp time-factor 6
OLT(config)#stp port 0/7/0 transmit-limit 16
OLT(config)#stp port 0/7/0 edged-port enable
OLT(config)#stp port 0/7/0 instance 0 cost 1024
OLT(config)#stp port 0/7/0 instance 0 port-priority 64
OLT(config)#stp port 0/7/0 point-to-point force-true
OLT(config)#stp bpdu-protection enable

                                      *****END*****

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.