Configuration of the NTP Broadcast Mode-HUAWEI

********NTP Broadcast Mode-GPON********

Let the following configurations: OLT-1 uses the local clock as the master NTP clock on stratum 2 and works in the NTP broadcast mode, broadcasting clock synchronization packets periodically through IP address 10.10.10.10/24 of the L3 interface of VLAN 2, and OLT-2 functions as the NTP client, listening to the broadcast packets sent from the server through IP address 10.10.10.20/24 of the L3 interface of VLAN 2 and synchronizing with the clock on the broadcast server. To perform these configurations, do as follows:

  1. OLT-1:
    OLT-1(config)#ntp-service refclock-master 2
    OLT-1(config)#vlan 2 standard
    OLT-1(config)#port vlan 2 0/19 0
    OLT-1(config)#interface vlanif 2
    OLT-1(config-if-vlanif2)#ip address 10.10.10.10 24
    OLT-1(config-if-vlanif2)#ntp-service broadcast-server
    OLT-1(config-if-vlanif2)#quit
    
  2. OLT-2:
    OLT-2(config)#vlan 2 standard
    OLT-2(config)#port vlan 2 0/19 0
    OLT-2(config)#interface vlanif 2
    OLT-2(config-if-vlanif2)#ip address 10.10.10.20 24
    OLT-2(config-if-vlanif2)#ntp-service broadcast-client
    OLT-2(config-if-vlanif2)#quit

                                                                         *******END********

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.