Configuration of the Standard DHCP Mode-HUAWEI

********Standard DHCP Mode-GPON*********

Let the server group 1 contains two DHCP servers working in active/standby mode, with the maximum response time of 20s, the maximum count of response timeout of 10, the IP address of the primary server 10.1.1.9 and the IP address of the secondary server 10.1.1.10. To bind server group 1 to users in VLAN 24 (with the IP address of the L3 interface 10.1.1.101), do as follows:

OLT(config)#dhcp mode layer-3 standard
OLT(config)#dhcp server mode backup 20 10
OLT(config)#dhcp-server 1 ip 10.1.1.9 10.1.1.10
OLT(config)#interface vlanif 24
OLT(config-if-vlanif24)#ip address 10.1.1.101 24
OLT(config-if-vlanif24)#dhcp-server 1

                                   ******END******

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.