Creating a GPON Service Port-HUAWEI

*******GPON Service Port Configuration********

Connect ONT to GPON port 0/2/0 of the MA5600T. Plan an Internet access user. The ONT provides the Internet-access-only service with a rate of 4096 kbit/s for this user, the index of the GEM port that carries the service is 135, the service VLAN ID is 1000, and only three users are allowed to use a same account for Internet access at the same time. The query shows that there is no proper traffic profile in the system. Then, create traffic profile 10. This user is not registered yet. Therefore, the service is not provided for the user for the moment. To configure such a user, do as follows:

OLT(config)#traffic table ip index 10 cir 4096 priority 3 priority-policy local-Setting
  Create traffic descriptor record successfully
  ------------------------------------------------
  TD Index             : 10
  TD Name              : ip-traffic-table_10
  Priority             : 3
  Copy Priority        : -
  CTAG Default Priority: 0
  Priority Policy      : local-pri
  CIR                  : 4096 kbps
  CBS                  : 133072 bytes
  PIR                  : 8192 kbps
  PBS                  : 264144 bytes
  Referenced Status    : not used
  ------------------------------------------------
OLT(config)#service-port 5 vlan 1000 gpon 0/2/0 gemport 135 inbound
 traffic-table index 10 outbound traffic-table index 10
huawei(config)#mac-address max-mac-count service-port 5 3
huawei(config)#service-port 5 adminstatus disable

Connect ONT to GPON port 0/3/0 of the MA5600T. A commercial user requires the Internet access service with a rate of 8192 kbit/s to be provided. For subsequent service expansion, the ONT provides the Internet access service for this user in the multi-service mode. The user is differentiated based on the user-end VLAN, S-VLAN ID is 1023, C-VLAN ID is 100, and the index of the GEM port that carries the service is 130.  To configure such a user, do as follows:

OLT(config)#traffic table ip index 8 cir 8192 priority 4 priority-policy local-Setting
  Create traffic descriptor record successfully
  ------------------------------------------------
  TD Index             : 8
  TD Name              : ip-traffic-table_8
  Priority             : 4
  Copy Priority        : -
  CTAG Default Priority: 0
  Priority Policy      : local-pri
  CIR                  : 8192 kbps
  CBS                  : 264144 bytes
  PIR                  : 16384 kbps
  PBS                  : 526288 bytes
  Referenced Status    : not used
  ------------------------------------------------
OLT(config)#service-port 10 vlan 1023 gpon 0/3/0 gemport 130 multi-service us
er-vlan 100 inbound traffic-table index 8 outbound traffic-table index 8
OLT(config)#service-port desc 10 description gpon/Vlanid:1023/uservlan:100

                                        *****END*****

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.