GPON HSI with Basic Service Configuration (HUAWEI)-MDU side configuration

⊗ MDU side configuration: 

6)Telnet to the MDU

7)Configure the user VLAN,

 The VLAN ID should follow the data plan to avoid confliction.

8)Add the uplink port to the user  VLAN

The uplink port should follow the data plan to avoid confliction.

 9)Add the service port to VLAN

Make sure the port id is matching the data plan.

 

***************MDU Side Configuration*************

Telnet to MDU

MA5600T-OLT-1(config)#telnet 172.16.         .          .

>>User name:root

>>User password: mduadmin

MA5620G-MDU-32>enable

MA5620G-MDU-32#config

(1)  Configure the user VLAN and add the uplink port

【add user VLAN】                                                               

MA5620G>enable

MA5620G#config 

MA5620G(config)# vlan 20

【add uplink port】

MA5620G(config)#port vlan 20 0/0 1

(2)  Query the existed traffic table

MA5620G(config)# display traffic table ip from-index 0

———————————————————

TID CIR(kbps) CBS(bytes) PIR(kbps) PBS(bytes) Pri Copy-policy Pri-Policy

———————————————————-

0    1024     34768      2048       69536      6    –     tag-pri

1    2496     81872      4992       163744     6    –     tag-pri

2    512      18384      1024       36768      0    –     tag-pri

3    576      20432      1152       40864      2    –     tag-pri

4    64        4048      128        8096       4    –     tag-pri

5    2048     67536      4096       135072     0    –     tag-pri

6    off        off      off        off        0    –     tag-pri

———————————————————-

Total Num : 7

(3)  Add the service port

【delete the default TLS flow】 

MA5620G(config)#undo service-port all

【add the service port with the system traffic table index 6】

MA5620G(config)#service-port vlan 20                                            

{ eth<K> }:eth                                                                  

{ frameid/slotid/portid<S><1,15> }:0/1/4                                       

{ other-all<K>|user-encap<K>|user-vlan<K> }:user-vlan                         

{ untagged<K>|user-vlanid<U><1,4094> }:untagged                                

{ rx-cttr<K> }:rx-cttr 6 tx-cttr 6

**********************Congratulations*********************

——————Configuration is done, Now test your system—————–

 

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.