GPON HSI with Basic Service Configuration (HUAWEI)-OLT side configuration

—–Configuration Procedure—-

⊗ OLT side configuration

⊗ ONT/ONU/MDU side configuration

⊗ OLT side configuration: 

1)Add MDU to OLT GPON port

Create ont-line profile/dba profile,  and then add the MDU;

2)Configure the service VLAN, and set the VLAN attribute as QinQ

The VLAN ID should follow the data plan to avoid confliction.

3)Add the uplink port to the service VLAN

The uplink port should follow the data plan to avoid confliction.

4)Add the service port VLAN

Make sure the gpon port/onu id/user vlan id are matching the data plan.

5)Create the inband management channel, and test the connectivity.

Create the management VLAN, add the uplink port the VLAN, and add the service port to VLAN.

Configure the management IP for OLT and MDU.

The VLAN ID and IP address should follow the data plan to avoid confliction.

 

***************OLT Side Configuration*************

(1) Telnet to OLT

>>User name:root

>>User password:admin

MA5600T-OLT-1>enable

MA5600T-OLT-1#config MA

MA5600T-OLT-1(config)#

(2)Add MDU to GPON port

(Add DBA profile)

MA5600T-OLT-1(config)#dba-profile

{ add<K>|delete<K>|modify<K> }:add

{ profile-id<K>|profile-name<K>|type1<K>|type2<K>|type3<K>|type4<K>|type5<K> }:profile-id { profile-id<U>(0,512)} :11

{ profile-name<K>|type1<K>|type2<K>|type3<K>|type4<K>|type5<K> }:type3 { assure<K> }:assure

{ assure-bandwidth<U><128,1235456> }:20480

{ max<K> }:max

{ max-bandwidth<U><128,1235456> }:40960

(add ont line profile)

MA5600T-OLT-1(config)#ont-lineprofile { gpon<K>|gpon<K> }:gpon                                                       

{ <cr>|profile-id<K>|profile-name<K> }:profile-id                               

{ profile-id<U><1,4096> }:10                                                    

{ <cr>|profile-name<K> }: (Give a Name here)     

MA5600T-OLT-1(config-gpon-lineprofile-10)#mapping-mode

{ iptos<K>|port-priority<K>|port-vlan-priority<K>|port-vlan<K>|port<K>|priority<K>|vlan-priority<K>|vlan<K> }:vlan

MA5600T-OLT-1(config-gpon-lineprofile-10)#tcont

{ tcont-list<S><Length 1-13> }:2

{ dba-profile-id<K>|dba-profile-name<K> }:dba-profile-id

{ profile-id<U><1,512> }:11

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem

{ add<K>|delete<K>|mapping<K>|modify<K> }:add

{ gem-index<U><0,127> }:10

{ service-type<E><eth,tdm> }:eth

{ tcont<K> }:tcont

{ tcont-id<U><0,7> }:2

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem

{ add<K>|delete<K>|mapping<K>|modify<K> }:mapping

{ gem-index<U><0,127> }:10

{ mapping-index<U><0,7> }:10

{ e1<K>|eth<K>|flow-car<K>|iphost<K>|moca<K>|priority<K>|vlan<K> }:vlan

{ vlan-id<U><0,4095> }:20

{ <cr>|flow-car<K>|priority<K> }:

【This is for NMS】

MA5600T-OLT-1(config-gpon-lineprofile-10)#tcont

{ tcont-list<S><Length 1-13> }:0

{ dba-profile-id<K>|dba-profile-name<K> }:dba-profile-id

{ profile-id<U><1,512> }:11

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem

{ add<K>|delete<K>|mapping<K>|modify<K> }:add

{ gem-index<U><0,127> }:0

{ service-type<E><eth,tdm> }:eth

{ tcont<K> }:tcont

{ tcont-id<U><0,7> }:0

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem

{ add<K>|delete<K>|mapping<K>|modify<K> }:mapping

{ gem-index<U><0,127> }:0

{ mapping-index<U><0,7> }:0

{ e1<K>|eth<K>|flow-car<K>|iphost<K>|moca<K>|priority<K>|vlan<K> }:vlan

{ vlan-id<U><0,4095> }:4000

{ <cr>|flow-car<K>|priority<K> }:

MA5600T-OLT-1(config-gpon-lineprofile-10)#commit

MA5600T-OLT-1(config-gpon-lineprofile-10)#quit

【Check the GPON port】

MA5600T-OLT-1(config-if-gpon-0/3)#interface gpon 0/3

MA5600T-OLT-1(config-if-gpon-0/3)#display port info 1

  ——————————————————–

  F/S/P                                      0/3/1

  Min distance(km)                           0

  Max distance(km)                           20

  Left guaranteed bandwidth(kbps)            1240576

  Number of T-CONTs                          0

  Autofind                                   Disable

  FEC check                                  Disable

  Laser switch                               On

  ONT encryption key switching interval(m)   Disable

【enable the ont auto find function】

MA5600T-OLT-1(config-if-gpon-0/3)#port 1 ont-auto-find enable

MA5600T-OLT-1(config-if-gpon-0/3)#

The command is executed successfully

【query the auto MDU】

MA5600T-OLT-1(config-if-gpon-0/3)#display ont autofind

{ portid<U><0,3> }:1

  Command:

          display ont autofind 1

——————————————————-

   Number    F/ S/ P         SN            Password

   ——————————————————-

    1        0/ 3/ 1    3230313192E95441

    2        0/ 3/ 1    323031312E396A41

   ——————————————————-

(Confirm the MDU, bind with the DBA profile and line profile)

MA5600T-OLT-1(config-if-gpon-0/3)#ont confirm

{ portid<U><0,7> }:1

{ all<K>|ontid<K>|password-auth<K>|sn-auth<K> }:ontid

{ ontid<U><0,127> }:30

{ password-auth<K>|sn-auth<K> }:sn-auth { sn<S><Length 13-16> }: 3230313192E95441

{ omci<K>|password-auth<K>|snmp<K> }:snmp

{ ont-lineprofile-id <K>|ont-lineprofile-name<K> }:ont-lineprofile-id { profile-id<U><1,4096> }:10

{ <cr>|desc<K> }:                                                             

【query MDU current state】

MA5600T-OLT-1(config-if-gpon-0/3)#display ont info

{ portid<U><0,3>|remote<K> }:1

{ ontid<U><0,63>|all<K> }:all

   ————————————————————

F/S/P  ONT-ID    SN            Control   Run  Config   Match     DBA

                                                   flag   state  state     state       type

———————————————————–

0/8/0   30  3230313192E95441  active  up  normal   match     SR

  ————————————————————

  In port 0, the total of ONTs are: 1

(3)  Configure the service VLAN, set the attribute

【add a VALN,set the type as smart】

MA5600T-OLT-1(config)#vlan 2000

{ vlantype<E><mux,standard,smart,super>|to<K> }:smart

【set attribute as QINQ】

MA5600T-OLT-1(config)#vlan attrib 2000 q-in-q

【check the existed VLAN】

MA5600T-OLT-1(config-if-gpon-0/3)#quit

MA5600T-OLT-1(config)#display vlan all

{ <cr>|vlantype<E><mux,standard,smart,super>|vlanattr<K> }:

  ———————————————————

  VLAN   Type      Attribute  STND-Port NUM   SERV-Port NUM

——————————————————–

     1   MUX       common                 4               0

 ———————————————————

  Total: 1

  Note : STND-Port–standard port, SERV-Port–service virtual port

(4)  Add the uplink port the service vlan

【add the uplink port】

MA5600T-OLT-1(config)#port vlan

{ vlanid<U><1,4093>|vlan-list<S><1,256> }:2000

{ frame/slot<S><1,15>|to<K> }:0/19  0

【add the downstream port】

MA5600T-OLT-1(config)#service-port

{ desc<K>|index<U><0,32767>|remote-desc<K>|vlan<K> }:vlan

{ aoe<K>|vlanid<U><1,4093> }:2000

{ adsl<K>|epon<K>|eth<K>|gpon<K>|shdsl<K>|vdsl<K> }:gpon

{ frameid/slotid/portid<S><Length 1-15> }:0/3/1

{ ont<K> }:ont

{ ontid<U><0,127> }:30

{ gemport<K> }:gemport

{ gemindex<U><0,127> }:10

{ <cr>|bundle<K>|inbound<K>|multi-service<K>|rx-cttr<K>|tag-transform<K> }:multi-service

{ user-8021p<K>|user-encap<K>|user-vlan<K> }:user-vlan

{ other-all<K>|priority-tagged<K>|untagged<K>|user-vlanid<U><1,4095> }:20

【query the VLAN configuration】

MA5600T-OLT-1(config)#display vlan all

———————————————————

  VLAN   Type      Attribute    STND-Port NUM   SERV-Port NUM

  ———————————————————

     1           MUX       common           4                        0

    2000      smart     QINQ                 1                        1

———————————————————

MA5600T-OLT-1(config)#display vlan 2000

{ <cr>|to<K> }:

  Command:

          display vlan 2000

  VLAN ID: 2000

  VLAN type: smart

  VLAN attribute: QINQ

  VLAN description:

  ——————————

   F/S /P     Native VLAN  State

  ——————————

   0/19/0               1  up 

  ——————————

  Standard port number: 1

  ——————————————————–

  INDEX  TYPE  STATE F/ S/ P  VPI  VCI   FLOWTYPE FLOWPARA

  ——————————————————–

      0  gpon  up    0/ 3/ 1  30    –     vlan     20     

  ——————————————————–

  Service virtual port number: 1

  Note: F–Frame, S–Slot, P–Port, VPI indicates GEM PortID for gpon or ONT ID for gpon, pri-tag indicates priority-tagge

(6)  Create the inband management channel

【add the management VLAN=4000】

MA5600T-OLT-1(config)#vlan 4000 smart 

【add the uplink port 】

MA5600T-OLT-1(config)#port vlan 4000  0/19  0

【switch to VLANinterface mode】

MA5600T-OLT-1(config)#interface vlanif 4000

【configure the OLT  inband management IP】

MA5600T-OLT-1(config-if-vlanif4000)#ip address 172.16.     .    _ 

【configure the MDU inband management IP】

MA5600T-OLT-1(config)#interface gpon 0/3

【configure the management service port】

MA5600T-OLT-1(config)#service-port

{ desc<K>|index<U><0,32767>|remote-desc<K>|vlan<K> }:vlan

{ aoe<K>|vlanid<U><1,4093> }:4000

{ adsl<K>|epon<K>|eth<K>|gpon<K>|shdsl<K>|vdsl<K> }:gpon

{ frameid/slotid/portid<S><Length 1-15> }:0/3/1

{ ont<K> }:ont

{ ontid<U><0,127> }:30

{ gemport<K> }:gemport

{ gemindex<U><0,127> }:0

MA5600T-OLT-1(config-if-gpon-0/3)#ont ipconfig

{ portid<U><0,7> }:1

{ ontid<U><0,127> }:30

{ dhcp<K>|static<K> }:static

{ gateway<K>|ip-address<K>|pri-dns<K>|slave-dns<K>|vlan<K> }:ip-address

{ ip-address<I><X.X.X.X> }:172.16.    _.      _

{ mask<K> }:mask

{ mask<M><X.X.X.X> }:255.255.0.0

{ <cr>|gateway<K>|pri-dns<K>|slave-dns<K>|vlan<K> }:gateway

{ gateway<I><X.X.X.X> }:172.16.    _.                            

{ <cr>|pri-dns<K>|slave-dns<K>|vlan<K> }:vlan

{ vlanid<U><0,4095> }:4000

{ <cr>|pri-dns<K>|priority<K>|slave-dns<K> }:                                               

 MA5600T-OLT-1(config-if-gpon-0/3)#quit  

{ <cr>|bundle<K>|inbound<K>|multi-service<K>|rx-cttr<K>|tag-transform<K> }:multi-service

{ user-8021p<K>|user-encap<K>|user-vlan<K> }:user-vlan

{ other-all<K>|priority-tagged<K>|untagged<K>|user-vlanid<U><1,4095> }:4000

—————————————END of OLT side configuration——————————————

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.