GPON VoIP Configuration-OLT side configuration

*******************Networking and Service Description*********************

Ø  The MDU obtains the IP address through static IP address.

Ø  Two phone sets are connected to POTS ports .

Ø  The MDUT is connected to the GPBC board of the MA5600T through the optical fiber.

########Configuration Procedure########

⊕ OLT side configuration

⊕ MDU side configuration

******************OLT side configuration Procedure*********************

1)Add MDU to OLT GPON port, and create the inband management channel.

No need to repeat if the MDU is already added, only modify the line profile (add the gem port, gem port mapping).

2)  Configure the service VLAN

The VLAN ID should follow the data plan to avoid confliction.

3)  Add the uplink port to the service VLAN

The uplink port should follow the data plan to avoid confliction.

4)  Add the service port VLAN

Make sure the gpon port/onu id/user vlan id are matching the data plan.

5)  Enable the VLAN user Bridge function

The VLAN ID should follow the data plan to avoid confliction.

6)Add the ip route to softswitch, ping the softswitch successfully..

******************OLT side configuration*********************

1) Telnet to OLT

>>User name:root

>>User password:admin


MA5600T-OLT-1#config MA


2) Update  ont line profile

MA5600T-OLT-1(config)#ont-lineprofile gpon profile-id 10 profile-name ma5620

MA5600T-OLT-1(config-gpon-lineprofile-10)#tcont 1 dba-profile-id 2

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem add 2 eth tcont 1

MA5600T-OLT-1(config-gpon-lineprofile-10)#gem mapping 2 2 vlan 101



3)  Configure the service VLAN

MA5600T-OLT-1(config)#vlan 101 smart

(4)  Add the uplink port to service VLAN

MA5600T-OLT-1(config)#port vlan 101 0/19 0

(5)  Add the service port to service VLAN

MA5600T-OLT-1(config)# service-port vlan 101 gpon 0/3/1 ont 30 gem port 2 multi-service  user-vlan 101

6)  Configure VLAN user Bridge function

(Create the VLAN service profile)

MA5600T-OLT-1(config)#vlan service-profile

{profile-id<K>|profile-name<K>}:profile-id {profile-id<U><1,256>}:1


{profile-name<S><Length 1-32>}:voip1

(Enable VLAN uer bridge function)



(bind the VLAN with the VLAN service profile)

MA5600T-OLT-1(config)#vlan bind service-profile {vlan-list<S><Length 1-256>}:101


{profile-name<S><Length 1-32>}:voip1

(7)   Add ip route

MA5600T-OLT-1(config)# ip route-static 24

******************End of OLT side configuration*********************


1 Comment

  1. I’d like to thank you for the efforts you’ve put in penning this site.
    I really hope to check out the same high-grade blog posts from you in the
    future as well. In truth, your creative writing abilities has inspired me to get my very
    own site now 😉

Leave a Reply

Your email address will not be published.


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.