Query the service-IPTV-HUAWEI

*******Query the IPTV Service Configuration*******

OLT(config-if-gpon-0/3)#display ont info

{ portid<U><0,7> }:{ all<K>|ontid<U><0,127> }:0

Command:

display ont info 0 0

———————————————————-

F/S/P                : 0/3/0

ONT-ID               : 0

Control flag         : active

Run state            : up

Config state         : normal

Match state          : match

DBA type             : SR

ONT ranging(m)       : 186

ONT battery state    : not support

Authentic type       : SN-auth

SN                   : :323031312E396341 (2011-2E396341)

Management mode      : OMCI

Isolation state      : normal

Description          : ONT_NO_DESCRIPTION

Last down cause      : –

Last up time         : 2010-02-04 14:58:55

Last down time       : –

Last dying gasp time : –

Type-C Support       : Not support

———————————————————-

Line profile ID      : 10

Line profile name    : hg850

———————————————————–

FEC upstream switch :Disable

Qos mode            :PQ

Mapping mode        :VLAN

———————————————————-

Notes: * indicates Discrete TCONT(TCONT UnBound)

———————————————————-

<T-CONT 0>          DBA Profile-ID:1

<T-CONT 2>          DBA Profile-ID:16

<Gem Index 6>

———————————————————-

|Serv-Type:ETH |Encrypt:off |Cascade:off |Priority:0  |GEM-CAR:-   |

————————————————————Mapping-index  VLAN   Priority   Port-type   Port-ID   Flow-CAR

————————————————————

6              200    –          –           –         –

————————————————————

Service profile ID   : 20

Service profile name : hg850

———————————————————

POTS          2

ETH           4

TDM           0

MOCA          0

CATV          0

———————————————————

TDM port type                     : E1

TDM service type                  : TDMoGem

MAC learning function switch      : Enable

ONT transparent function switch   : Disable

Multicast forward mode            : Unconcern

Multicast forward VLAN            : –

Multicast mode                    : Unconcern

Upstream IGMP packet forward mode : Unconcern

Upstream IGMP packet forward VLAN : –

————————————————————

Port-type Port-ID QinQmode PriorityPolicy

————————————————————

ETH       1       unconcern unconcern

ETH       2       unconcern unconcern

ETH       3       unconcern unconcern

ETH       4       unconcern unconcern

———————————————————-

Port-type Port-ID Service-type Index S-VLAN S-PRI C-VLAN C-PRI

————————————————————

ETH       1       Translation  1     1      –     1      –

ETH       2       Translation  1     1      –     1      –

ETH       2       Translation  2     200    –     200    –

ETH       3       Translation  1     1      –     1      –

ETH       4       Translation  1     1      –     1      –

IPHOST    1       Translation  1     1      –     1      –

————————————————————

OLT(config-if-gpon-0/3)#quit

Query VLAN

OLT(config)#display vlan all

{ <cr>|vlantype<E><mux,standard,smart,super>|vlanattr<K> }:

———————————————————

VLAN   Type      Attribute  STND-Port NUM   SERV-Port NUM

———————————————————

1     MUX      common          4              0

200   smart    common          1              1

———————————————————

Total: 2

Note : STND-Port–standard port, SERV-Port–service virtual port

OLT(config)#display vlan 200

{ <cr>|to<K> }:

Command:

display vlan 200

VLAN ID: 200

VLAN type: smart

VLAN attribute:common

VLAN description:

——————————

F/S /P     Native VLAN  State

——————————

0/19/0               1  up

——————————

Standard port number: 1

——————————————————–

INDEX  TYPE  STATE F/ S/ P  VPI  VCI   FLOWTYPE FLOWPARA

——————————————————–

111  gpon  up    0/ 3/ 0  0    6    vlan     200

——————————————————–

Service virtual port number: 1

Note: F–Frame, S–Slot, P–Port, VPI indicates GEM PortID for gpon or ONT ID for gpon, pri-tag indicates priority-tagged

 Query IGMP User

OLT(config)#display igmp user all

Command:

display igmp user all

Command is being executed, please wait…

————————————————————

User Port   Bind     State   Auth   Quick     IGMP    Video   Log    Available   profiles    leave     flow ID flow ID switch programs

———————————————————-  0/3/0/111   –    offline no-auth MAC-based 0    0  enable  8        ————————————————————

Total: 1

Query IGMP configure

OLT(config-mvlan200)#display igmp config

{ global<K>|vlan<K> }:vlan { all<K>|vlanid<U><1,4093> }:200

Command:

display igmp config vlan 200

————————————————————

IGMP mode                        : proxy

IGMP version                     : IGMP V3

Log switch                       : enable

Default uplink port              : 0/19/0

Report proxy switch              : disable

Leave proxy switch               : disable

Unsolicited report interval(s)   : 10

IGMP priority                    : 6

Send global leave switch         : enable

Program match mode               : enable

Program match group              : –

————————————————————

OLT(config-mvlan200)#display igmp program

{ all<K>|current-status<K>|index<K>|member<K>|name<K>|vlan<K> }:all

Command:

display igmp program all

————————————————————

Index| Create |      IP       |     Program      |User |VLAN |Prejoin|Priority| Flag   |    Address    |       name       |num  | ID  |       |

————————————————————0    S   224.1.1.1   PROGRAM-0     0     200   disable    7

1    S   224.1.1.2   PROGRAM-1     0     200   disable    7

2    S   224.1.1.3   PROGRAM-2     0     200   disable    7

8    S   224.1.1.9   PROGRAM-8   0     200   disable    7

9    S  224.1.1.10   PROGRAM-9   0     200   disable    7

————————————————————

Total: 10 program(s) (Static/Dynamic: 10/0)

Note : # The program data is valid, but it is no license.

Query multicast VLAN member

OLT(config)#display igmp multicast-vlan

{ member<K> }:member

{ port<K>|service-port<K>|vlan<K> }:service-port

{ index<U><0,32767> }:111

Command:

display igmp multicast-vlan member service-port 0

Multicast vlan(s) the user joined :

————————————————-

200

————————————————-

Query IGMP log

OLT(config)#display igmp log

{ all<K>|ip<K>|port<K>|service-port<K>|statistic<K> }:all

{ <cr>||<K> }:

Command:

display igmp log all

———————————————————-

Port         Program-IP      Vlan Mode Join-time           Leave-time

———————————————————-

0/5/1/0   224.1.1.1   200  W    2010-02-04 15:07:08 2010-02-04 15:07:53

———————————————————-

The GPON IPTV service configuration is finished.

Congratulations!

*******END********

Be the first to comment

Leave a Reply

Your email address will not be published.


*