******Stack VLAN Configure in ZTE OLT-GPON*****
♦ Please make sure that the network device works normally.
♦ Please make sure that the ONU is registered.
♦ Please log in to the ZXA10 C220 through HyperTerminal or Telnet.
Task-1: Follow the configure terminal command to enter global configuration mode.
Task-2: Follow the interface command to enter the GPON-ONU configuration mode.
Task-3: Follow the switchport default vlan command to configure port PVID.
Task-4: Follow the switchport default cvlan command to configure port CPVID.
In VLAN stacking application, when the ZXA10 C220 receives an upstream untag packet on the GPON-ONU
port, it adds both PVID and CPVID (CVLAN PVID) to the packet.