VLAN Port Mode Configuration in ZTE OLT-ZTE

gpontutorials.com-Configuration of VLAN Port Mode in ZTE OLT
gpontutorials.com-Configuration of VLAN Port Mode in ZTE OLT

*** Configuration of VLAN Port Mode in ZTE OLT***

Please make sure that the network device works normally.

♦ Please log in to the ZXA10 C220 through HyperTerminal or Telnet.

Task-1: Enter the configure terminal command to enter global configuration mode.

Task-2: Enter the interface command to enter interface configuration mode.

Task-3: Enter the switchport mode command to configure port VLAN mode.

IMPORTANT: The default port mode is hybrid.

Task-4: Enter the show vlan port command to query port VLAN configuration.

IMPORTANT:

Access mode: Accepts untag packets only and can be added to only one VLANs in utag mode.

Trunk mode: Accepts tag packets only and can be added to multiple VLANs in tag mode.

Hybrid mode: Accepts both tag or untag packets and can be added to multiple VLANs in either tag or untag mode.

Transparent mode: Accepts all tag packets.

 

***Configuration file of VLAN Port Mode in ZTE OLT-ZTE***

 Uplink port 0/12/1: Hybrid

⇒ GPON-ONU port 0/3/1:1: Trunk 

 OLT-1#configure terminal

OLT-1(config)#interface gei_0/12/1

OLT-1(config-if)#switchport mode hybrid

OLT-1(config-if)#exit

OLT-1(config)#interface gpon-onu_0/3/1:1

OLT-1(config-if)#switchport mode trunk

***END***

 

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.