***Configuration of VLAN Translate in ZTE OLT***
♦ Please make sure that the network device works normally.
♦ Make sure the ONU is registered.
♦ Please log in to the ZXA10 C220 through HyperTerminal or Telnet.
Task-1: Follow configure terminal command to enter global configuration mode.
Task-2: Follow the interface command to enter the GPON-ONU configuration mode.
Task-3: Follow the switchport mode command to configure port VLAN mode.
Task-4: Follow the switchport translate command to configure VLAN translate rule.
♦ In a VLAN, VLAN QinQ and VLAN translate cannot be configured simultaneously.
♦ User VLAN ID and SVLAN ID must be different.