ZTE F622 ONU register ZXA10 C220 OLT-ZTE

gpontutorials.com-ZTE-F622 ONU register ZXA10 C220 OLT
gpontutorials.com-ZTE-F622 ONU register ZXA10 C220 OLT

*** ZTE-F622 ONU register ZXA10 C220 OLT***

Please make sure that the network device works normally.

Please make sure that the GPON card works normally.

Please log in to the ZXA10 C220 through HyperTerminal or Telnet.

Task-1: Enter the show onu-type gpon command to query GPON ONU types.

Task-2: Enter the show gpon onu uncfg command to query unauthenticated ONU.

Task-3: Enter the configure terminal command to enter the global configuration mode.

Task-4: Enter the interface command to enter the GPON-OLT interface configuration mode.

Task-5: Enter the register command to register ONU.

Task-6: Enter the show gpon onu state command to query state of registered ONU.

 

**Configuration file of ZTE-F622 ONU register ZXA10 C220 OLT-ZTE**

  OLT-1#show onu-type gpon

  OLT-1#show gpon onu uncfg gpon-olt_0/2/1

  OLT-1#configure terminal

OLT-1(config)#interface gpon-olt_0/2/1

OLT-1(config-if)#register 1 type ZTE-F622 ZTE_06120664 state ready

OLT-1(config-if)#show gpon onu state gpon-olt_0/2/1

 

***END***

 

Be the first to comment

Leave a Reply

Your email address will not be published.


*


For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.

I agree to these terms.